no plane, bow high

A forum for discussing topics relating to MacGregor Powersailor Sailboats

Moderators: Catigale, Paul S, Heath_Mod, beene, Hamin' X, kmclemore, tangentair

Post Reply
Duquette5
Chief Steward
Posts: 55
Joined: Mon Sep 18, 2017 8:19 pm
Sailboat: MacGregor 19
Location: Central Massachusetts

no plane, bow high

Post by Duquette5 » Sun Jul 28, 2019 9:09 am

Why? Because the combined weight of my Mercury and myself is 500#'s :o and the :mac19: has a flat transom and I forgot to install the wedges to compensate for the flat transom :x Figured this all out this morning when I went out to adjust the motor on the jackplate. Highlander - Did you set your cav plate even with the hull pad? Mine looks like it's about 3.5" higher. (10" offset plate)

Since the wife and her mother took the tow vehicle camping I cant do any work on Dukling today. Well, I guess I could go do the gelcoat work on the hatch I rebuilt.

>M<

andarlite
Just Enlisted
Posts: 20
Joined: Fri Oct 22, 2010 8:42 pm
Sailboat: MacGregor 19
Location: Mississauga, Ontario
Contact:

Re: no plane, bow high

Post by andarlite » Tue Jul 30, 2019 10:59 am

Add some doel fins to your motor. I had the same problem on my :mac19: and these helped tremendously.

User avatar
Deeseas
Chief Steward
Posts: 84
Joined: Mon May 15, 2006 4:43 pm
Sailboat: MacGregor 19
Location: Pt. Coquitlam, B.C. Canada

Re: no plane, bow high

Post by Deeseas » Mon Aug 05, 2019 6:57 pm

Yes, Doel fins make a big difference, also weight distribution is key. I moved my battery to the bow storage, when not planning on sleeping aboard, everything
goes up to the bow berth, extra clothes, totes with misc., cooler with misc. LOL. All Macgregors suffer from the same thing all the weight is in the stern engine, fuel and crew.

Post Reply