This is a new offering from BWY. Nice idea.
https://shop.bwyachts.com/ProductDetail ... 9dfa5f301d
new BWY mast foot plate
- Tomfoolery
- Admiral
- Posts: 6135
- Joined: Tue Jul 05, 2011 7:42 am
- Sailboat: MacGregor 26X
- Location: Rochester, NY '99X BF50 'Tomfoolery'
Re: new BWY mast foot plate
Only $35. Real nice, and something I miss from larger boats. 
I just don't know if the screws will even come out at this point, they've been in there for so long.
I just don't know if the screws will even come out at this point, they've been in there for so long.
- sailboatmike
- Admiral
- Posts: 1597
- Joined: Thu Mar 12, 2015 10:17 pm
- Sailboat: MacGregor 26X
- Location: Australia
Re: new BWY mast foot plate
I saw that, it looks brilliant and the answer to what I have been looking for to bring the lines back to the cockpit, BWY also do a double halyard block you can attach to the mast.
http://shop.bwyachts.com/product-p/3312-100.htm
http://shop.bwyachts.com/product-p/3312-100.htm
- Tomfoolery
- Admiral
- Posts: 6135
- Joined: Tue Jul 05, 2011 7:42 am
- Sailboat: MacGregor 26X
- Location: Rochester, NY '99X BF50 'Tomfoolery'
Re: new BWY mast foot plate
My boat came with a small block attached to the deck, which I suspect was originally for the main halyard. But it's too small for the halyard that's on there, which in turn is too big (IMO) for such a small main sail. The PO attached a single block to the bail at the bottom of the mast that's used for the vang, and the block scrapes the mast. Kludgey solution at best, but it functions. The base plate would clean that up considerably.
