Hi guys, I have 2015 90 hp 1.5 lt. suzi on my heavy 26M with 13.75x3x15 solas prop. steering is lot worse than a light 50 hp honda because of the additional 60 kgs. tilting down or up is an another problem. it has the power what 26m needs.!!!! if you want a really fast boat , go for it! if you want ...

Hi,
I have some data with Solas Rubex 13.75X13X3 prop:
(iphone gps prog)

2000 rpm; 6.5 mph
6200 rpm; 20 mph

with ballast, 2 persons and same conditions....

Thanks,

Thanks Victor,

I tested with ballast and 2 people,same conditions:

hit 6200 rpm again...I noticed they send me 13.5X15X3 prop not the 13.875X15X3 as a stock prop.I can replace with the 13.875 one.
Can't decide which one to choose...????
Any advise...??

Thanks a lot,

and........

75 kg. of fresh water tank under the aft bed.........!!!!

What an upgrde from 808 cc. Honda BF50A ...It's great!!!

just tested..... fully loaded without ballast ,4 people,80 watts solar,45 kg. lead in the keel,45 kg. batteries,12v 50 lt. fridge full,30 litres of fuel,bottom paint,mast up and sails on: Solas 13.75X13X3 prop with rubex 150 kit installed and I easily hit 6200 rpm... no gps data.. but I was suprised...

Hi guys, at last my beast was installed on 16th. of May here are some photos: http://i1148.photobucket.com/albums/o578/milest04/IMG_3240_zps9lwf9yt7.jpg http://i1148.photobucket.com/albums/o578/milest04/IMG_3239_zpsj2xbbjvs.jpg http://i1148.photobucket.com/albums/o578/milest04/IMG_3248_zpssajx9khz.j...

delivery problems.....need to wait 15 days more.....
they don't have any 13 pitch prop
....

vkmaynard wrote:Did you get the internal throttle assembly?

Victor

No,not yet...Will I have some trouble with that???

Thanks,

Thank you all,guys....
I've sold the Honda BF50A for $4.6 k. Waiting for the Suzi DF90A in 10 days

Hi everyone,

Do you use this way for set up limit on page 22 ? http://suzuki.ru/uploads/files/376/DF70 ... UAL%20.pdf

I have seen some other way to set before on the motor.

Thanks,

Your first link is a 14x11x4, which is the right choice for my E-tec 90 on my heavy X with bottom paint; however there are other X's out there with the same motor that would have no trouble swinging the 15-pitch prop shown on your second link. I would take your 3x14x13 prop for a test run, both bal...

Hi everybody, I ordered DF90A with 3X14X13 prop for my heavy :macm: with bottom paint.For a spare I found this one http://boatpropellers.iboats.com/Suzuki/90_HP_(2009Newer)_11.00-Pitch_Vortex_XHS_941411_Propeller/870/38602/?cart_id=117732590 or I should go for that one http://boatpropellers.iboats.c...

Yes you can use the same holes. Our motor actually sits about 3/4" above the transom for a proper height. I would also at least use the transom mounting plate on the inside http://www.thmarine.com/products/Outboard-Jack-Plates/Transom-Support-Plates/Transom-Support-Plate and large thick fender...

vkmaynard wrote:Will be fun!

Keep us posted.

Victor

Victor,

You also upgrade from Honda BF50..... Can I use the same holes on the transom?

Thanks,

Thank you guys all,

I hope my beast will be arrived on 15th. of april... and installed asap...I'll keep you posted...
Thanks,