So where is the fender locker on the mac

I got a 430S recently too. Excellent piece of equipment and fits the pedastool of the 26X perfectly.

The only problem I have is that when i go over about 8 knts I loose the sonar. I have tried lowering the transducer (mounted on the transom) but no difference.

Any suggestions?

have a small motorcycle type starting battery mounted at the pedastool which is wired to an isolator switch there. this is then connected to a Voltage sensitive relay. http://www.bepmarine.com/showproduct.cfm?productid=12 The VSR ensures the starting battery receives the charge until fully charged a...

bastonjock, Our route was from Inverness down the Caledonian Canel through Loch Ness and onward to Fort William where we entered Loch Linne and sailed to the Lynn of Lorne to Dunstafanage Marina onto Oban and up the Sound of Mull to Tobermory and Loch Sunart. And back. Philip I've been to see Billy ...

Thought you might like to share our photos of our eight day cruise of the west coast covering nearly 300 miles.

Enjoy. We did!

http://www.photobox.co.uk/album/5801301 and slideshow.

Took the boat out of the water, with 40 litres still on board, back in November last year, no additive to the fuel, started first time in May this year. Maybe I was lucky or maybe this fuel addative is a load of nonsense!

I have implemented a similiar system on my 26X. I have a small 50amp starting battery mounted at the pedastool which is wired to an isolator switch there. this is then connected to a Voltage sensitive relay. http://www.bepmarine.com/showproduct.cfm?productid=12 The VSR ensures the starting battery r...

Could'nt of asked for a moe informative reply. Thanks Graham

Gerry

Trying to make a ' bolt on' raised seat modification to 50/50 but the boat is away at the momment.

Can anybody give me the dimension of the lifting seat of the 26X.

Thanks

Thanks Graham

Can anyone give me the thicknes of the rails at the pushpit.

I need to order a bbq and they have two connector thickness. 25mm or 28-32mm.

Thanks

Trying to raise the jib up the furler and about 2 foot from the top the sail stops raising. Took the sail off and tried it; right to the top no bother. tried it with a short piece of rope in the channel and the same thing happened stops with a definate clunk as if its hitting some form of stop. This...

Eric
Must agree, great photos and interesting summary of the sailing.

Thinking of putting a spayhood on fifty fifty but was thinking it may impair going forward. Looking at your full enclosure It strikes me that it must be difficult?

Thought i'd better embellish my request.

I need a sail cover and have no 'off the shelf' availability here in the Highlands of Scotland. My best bet is to have one made and I thought I'd ask the 'board' for dimensions of the ones already in use.

Appreciate a response if poss.

Cheers
Gerry

could has anyone tell me the dimensions required for the sail cover for the 26x?

Regards
Gerry