Great Product simple to install and use.
0 out of 0 people found this review helpful.
May 06, 2009
I have used this product for a week. It was easy to install and works great. To install it you just make a cold water connection, add a hand held shower head with hose and attach the supplied gas line. You need to install a shut off valve before it as the internal water valve does not turn off the water completely. Within 30 seconds of water flowing you get hot water. On high it is too hot so you need to use caution. We just set the flow and flame setting on the unit to get the right temp. We have a 1/4 turn cut off valve on the cold water line. Now when we turn on that valve the heater starts and you get perfect temperature water at the shower head. The gas hose is plenty long so the propane tank can be out of the way. The unit looks good and was easy to hang. Total installation took less than a 1/2 hour.
