Plan of Macgregor M saloon Table

A forum for discussing topics relating to MacGregor Powersailor Sailboats
Forum rules
Post Reply
User avatar
r.fairman
Chief Steward
Posts: 79
Joined: Sat Dec 22, 2007 5:21 am
Location: Aegean Turkey Mac M 60HP mercury

Plan of Macgregor M saloon Table

Post by r.fairman »

Does anyone have an accurate Plan of the Macgregor 26M saloon Table that I can have

regards

richard
Top
User avatar
RobertB
Admiral
Posts: 1863
Joined: Sun Jun 05, 2011 7:42 pm
Sailboat: MacGregor 26M
Location: Clarksville, MD

Re: Plan of Macgregor M saloon Table

Post by RobertB »

Do you just need a drawing of the existing table? Or is this something other than stock you are looking for? If stock, I can measure mine, should be easy.
Top
User avatar
r.fairman
Chief Steward
Posts: 79
Joined: Sat Dec 22, 2007 5:21 am
Location: Aegean Turkey Mac M 60HP mercury

Re: Plan of Macgregor M saloon Table

Post by r.fairman »

I need the dimensions of the stock table the shape is some sort of trapesoid

thanks
Top
User avatar
c130king
Admiral
Posts: 2730
Joined: Sun Nov 05, 2006 5:30 pm
Sailboat: MacGregor 26M
Location: Wiggins, MS --- '05 26M "König" w/ 40hp Merc
Contact:
Contact c130king

Re: Plan of Macgregor M saloon Table

Post by c130king »

Image Image

I am about to drive over to the marina for day of potentiallly rainy sailing. I will take some measurements. But my Dad and I remade the table from my :macm: . It is exactly the same size but over 2" thick as it has a lift top for storing charts and paperwork inside. And it has fiddles on the edge. I had intended to get a sheet of plexiglass so I could put a chart on the table and then cover it with plexi...the fiddles would hold it in place. But I never did that.

Cheers,
Jim
Sailing on König
Sailing on König YouTube Channel
Top
User avatar
mdeane
Engineer
Posts: 136
Joined: Mon Oct 05, 2009 5:40 am
Sailboat: MacGregor 26M
Location: Atlanta, GA

Re: Plan of Macgregor M saloon Table

Post by mdeane »

c130king wrote:Image Image

I am about to drive over to the marina for day of potentiallly rainy sailing. I will take some measurements. But my Dad and I remade the table from my :macm: . It is exactly the same size but over 2" thick as it has a lift top for storing charts and paperwork inside. And it has fiddles on the edge. I had intended to get a sheet of plexiglass so I could put a chart on the table and then cover it with plexi...the fiddles would hold it in place. But I never did that.

Cheers,
Jim
Sailing on König
Sailing on König YouTube Channel

Can your tabletop design still be used as the starboard berth filler board?

Marc 8)
Top
User avatar
mdeane
Engineer
Posts: 136
Joined: Mon Oct 05, 2009 5:40 am
Sailboat: MacGregor 26M
Location: Atlanta, GA

Re: Plan of Macgregor M saloon Table

Post by mdeane »

r.fairman wrote:Does anyone have an accurate Plan of the Macgregor 26M saloon Table that I can have

regards

richard

My 2005 M tabletop is 39 1/2" x 30" . The front corners are 8" radius quarter rounds.

Marc 8)
Top
User avatar
c130king
Admiral
Posts: 2730
Joined: Sun Nov 05, 2006 5:30 pm
Sailboat: MacGregor 26M
Location: Wiggins, MS --- '05 26M "König" w/ 40hp Merc
Contact:
Contact c130king

Re: Plan of Macgregor M saloon Table

Post by c130king »

mdeane wrote: Can your tabletop design still be used as the starboard berth filler board?
Marc,

I don't think so. I have never put the original table or the new table in that position...and I don't have the cushions for it either. But the new table is probably about 2 inches taller/thicker than the standard table and that is not counting the 1/2" high fiddles.

Cheers,
Jim
Top
Post Reply

Return to “MacGregor Powersailor Discussion”