New guy from Texas (with a million questions)
- GonePostal
- Deckhand
- Posts: 40
- Joined: Sun Apr 04, 2021 3:22 pm
- Sailboat: Venture 2-22
- Location: Cranfills Gap, TX
New guy from Texas (with a million questions)
Hello all. Ive been lurking here a while but made a profile as I recently acquired a 22ft Macgregor Venture sailboat...
Im only half kidding about the million questions haha Im learning, but I know very little about sailing.
I wouldnt consider my boat a 'project' but its not ready to sail at the moment, hence the million questions.
Anyhoo... Just thought Id say Hi!
-Chris
Im only half kidding about the million questions haha Im learning, but I know very little about sailing.
I wouldnt consider my boat a 'project' but its not ready to sail at the moment, hence the million questions.
Anyhoo... Just thought Id say Hi!
-Chris
Chris
1980 Venture 2-22
Nissan Marine 6hp
1980 Venture 2-22
Nissan Marine 6hp
- Jimmyt
- Admiral
- Posts: 3166
- Joined: Sat Jul 18, 2015 9:52 am
- Sailboat: MacGregor 26M
- Location: Mobile AL 2013 26M, 60 Etec
Re: New guy from Texas (with a million questions)
Welcome Chris!
Glad to have you! We'd love to see pics of your boat when you get a chance.
Glad to have you! We'd love to see pics of your boat when you get a chance.
Jimmyt
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
- kmclemore
- Site Admin
- Posts: 6037
- Joined: Sun Feb 08, 2004 9:24 am
- Sailboat: MacGregor 26X
- Location: Ambler, PA -- MACX2018A898 w/ Tohatsu 50D -- 78 BW Harpoon 4.6 -- 2018 Tahoe 550TF w/ 150 Merc
Re: New guy from Texas (with a million questions)
Well, if you've got a million questions you'd best have a million slices of pizza. New guy buys, that's the rules. I take anchovies.
(Welcome, Chris! I'm one of the admins here... or as others like to say, the forum police. Just swinging through on my beat.....)
(Welcome, Chris! I'm one of the admins here... or as others like to say, the forum police. Just swinging through on my beat.....)
- Be Free
- Admiral
- Posts: 1340
- Joined: Fri Nov 23, 2012 6:08 pm
- Sailboat: MacGregor 26X
- Location: Steinhatchee, FL
Re: New guy from Texas (with a million questions)
Good morning Chris and welcome to the forum.
If you've been lurking for a while you know that this is just about the friendliest and most on-topic forum out there. Whatever you need help with someone here has probably "been there - done that" already and is ready and willing to share. Give us your best shot.
Bill
If you've been lurking for a while you know that this is just about the friendliest and most on-topic forum out there. Whatever you need help with someone here has probably "been there - done that" already and is ready and willing to share. Give us your best shot.
Bill
Bill
2001 26X Simple Interest
Honda BF40D
"If I were in a hurry I would not have bought a sailboat." Me
2001 26X Simple Interest
Honda BF40D
"If I were in a hurry I would not have bought a sailboat." Me
- dlandersson
- Admiral
- Posts: 4531
- Joined: Fri Aug 27, 2010 10:00 am
- Sailboat: MacGregor 26X
- Location: Michigan City
Re: New guy from Texas (with a million questions)
Okay, first you hafta buy everyone pizza
The:
1. Answers - free
2. Answers requiring thought - .25 cents
3. Correct answers - $1
The:
1. Answers - free
2. Answers requiring thought - .25 cents
3. Correct answers - $1
GonePostal wrote: ↑Sun Apr 04, 2021 3:39 pm Hello all. Ive been lurking here a while but made a profile as I recently acquired a 22ft Macgregor Venture sailboat...
Im only half kidding about the million questions haha Im learning, but I know very little about sailing.
I wouldnt consider my boat a 'project' but its not ready to sail at the moment, hence the million questions.
Anyhoo... Just thought Id say Hi!
-Chris
-
- Engineer
- Posts: 170
- Joined: Sat Aug 11, 2012 12:53 pm
- Sailboat: MacGregor 22
- Location: Dania, FL
Re: New guy from Texas (with a million questions)
Hi Chris. Welcome to the forum. I also have a Mac 22 that's torn down for a major refit. Please feel free to ask any and all questions here or by PM. Wherever you go, chances are I've been there before.
Chip Veres
s/v Sand Dollar
Chip Veres
s/v Sand Dollar
- GonePostal
- Deckhand
- Posts: 40
- Joined: Sun Apr 04, 2021 3:22 pm
- Sailboat: Venture 2-22
- Location: Cranfills Gap, TX
Re: New guy from Texas (with a million questions)
Hahaha Thanks for the warm welcome everyone... pizza will be forthcoming
Ive got some parts on order and will hopefully be doing some work this coming weekend.
As for questions Ill start a new thread but basically Im doing some work on my keel (the winch handle just spons) and as far as rigging and whatnot... well, Im clueless haha
Im gonna try to step the mast at my house and hopefully figure it out. Ill post some pics too! Thanks again everyone!
Ive got some parts on order and will hopefully be doing some work this coming weekend.
As for questions Ill start a new thread but basically Im doing some work on my keel (the winch handle just spons) and as far as rigging and whatnot... well, Im clueless haha
Im gonna try to step the mast at my house and hopefully figure it out. Ill post some pics too! Thanks again everyone!
Chris
1980 Venture 2-22
Nissan Marine 6hp
1980 Venture 2-22
Nissan Marine 6hp
- Jimmyt
- Admiral
- Posts: 3166
- Joined: Sat Jul 18, 2015 9:52 am
- Sailboat: MacGregor 26M
- Location: Mobile AL 2013 26M, 60 Etec
Re: New guy from Texas (with a million questions)
This is the link to the V22 manual (generic for several models).
https://macgregorsailors.com/resources/ ... Manual.pdf
Watch all of your standing rigging as you raise the mast. Make sure not to kink anything. Be careful, and have a buddy around if possible to help watch and be another set of hands if required.
https://macgregorsailors.com/resources/ ... Manual.pdf
Watch all of your standing rigging as you raise the mast. Make sure not to kink anything. Be careful, and have a buddy around if possible to help watch and be another set of hands if required.
Jimmyt
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
- NiceAft
- Admiral
- Posts: 6157
- Joined: Tue Feb 01, 2005 7:28 pm
- Sailboat: MacGregor 26M
- Location: Upper Dublin,PA, USA: 2005M 50hp.Honda4strk.,1979 Phantom Sport Sailboat, 9'Achilles 6HP Merc 4strk
Re: New guy from Texas (with a million questions)
Welcome Chris.
Glad you found us, stopped lurking, and signed onboard.
Here you will find the answers to all your question, from guys who know what they're talking about; guys who think they know what they're talking about, and those who are just guessing.
When it comes to Mac's, this is the place to be.
Glad you found us, stopped lurking, and signed onboard.
Here you will find the answers to all your question, from guys who know what they're talking about; guys who think they know what they're talking about, and those who are just guessing.
When it comes to Mac's, this is the place to be.
Ray ~~_/)~~
- GonePostal
- Deckhand
- Posts: 40
- Joined: Sun Apr 04, 2021 3:22 pm
- Sailboat: Venture 2-22
- Location: Cranfills Gap, TX
-
- Engineer
- Posts: 170
- Joined: Sat Aug 11, 2012 12:53 pm
- Sailboat: MacGregor 22
- Location: Dania, FL
Re: New guy from Texas (with a million questions)
I found a keel winch at Northern Tool for little money. Just wanted to mention it in case your winch doesn't feel like being fixed. Had to re-use the handle off the old one for clearance.
Chip V.
Chip V.
- Tomfoolery
- Admiral
- Posts: 6135
- Joined: Tue Jul 05, 2011 7:42 am
- Sailboat: MacGregor 26X
- Location: Rochester, NY '99X BF50 'Tomfoolery'
Re: New guy from Texas (with a million questions)
That pretty much sums it up, doesn’t it?
Tom
Be seeing you . . .
Be seeing you . . .
- Brian
- Engineer
- Posts: 107
- Joined: Fri Jul 22, 2005 7:17 pm
- Sailboat: MacGregor 26M
- Location: Austin, TX 2006 26M "Soñador" white hull MACM0852G506 TLDI 90
Re: New guy from Texas (with a million questions)
Welcome Chris. Where in the Lone Star State are you? I think that it is the second largest state (after Alaska) by area, so just because I am in the same state it does not mean that it would be easy for me to collect on that pizza...
Last edited by Brian on Mon Apr 05, 2021 7:49 pm, edited 1 time in total.
2006 26M "Soñador" white hull MACM0852G506
TLDI 90
TLDI 90
- Dougiestyle
- Engineer
- Posts: 145
- Joined: Wed Oct 18, 2017 7:18 pm
- Sailboat: MacGregor 26X
- Location: Rockport TX
Re: New guy from Texas (with a million questions)
Hi welcome to the group!!
If you get a winch make sure it is a brake winch. That will stop you from breaking fingers if the handle gets away from ya.
blue water yachts can help with the proper type winch.
If you get a winch make sure it is a brake winch. That will stop you from breaking fingers if the handle gets away from ya.
blue water yachts can help with the proper type winch.
Dougiestyle
1998 26X , Nissan 50D, "Water Buffalo"
1998 26X , Nissan 50D, "Water Buffalo"