26M Swim platform
-
MisfitSailers
- Posts: 5
- Joined: Sun Aug 22, 2021 9:11 am
- Sailboat: MacGregor 26M
- Location: Oklahoma
Re: 26M Swim platform
We saw this video and a post elsewhere with someone who had a fiberglass swim platform. I would 100% buy this if it were sold somewhere. If anyone finds a lead, please let me know.
-
adudinsk
- First Officer
- Posts: 495
- Joined: Tue Aug 27, 2019 12:53 pm
- Sailboat: MacGregor 26M
- Location: Belle River Ontario
Re: 26M Swim platform
Also did you see the one guy (non-english YouTube video) that put bow thrusters in his 26M... looking for that one as well.
Did a really nice job.
AD
Did a really nice job.
AD
-
OverEasy
- Admiral
- Posts: 2873
- Joined: Mon Sep 28, 2020 11:16 am
- Sailboat: MacGregor 26X
- Location: NH & SC
Re: 26M Swim platform
There was another guy who rigged up a trolling motor in line with his bow line that was able to extend/retract AND steer it via a wireless remote fob.!!!!
And then there are items like the Minkota Auto-Deploy Trolling motors (with extended shaft) coupled with a hand held wireless controller. Some even have GPS position hold options.
And then there are items like the Minkota Auto-Deploy Trolling motors (with extended shaft) coupled with a hand held wireless controller. Some even have GPS position hold options.
Last edited by OverEasy on Wed Oct 20, 2021 3:53 pm, edited 3 times in total.
-
wakataka
- Chief Steward
- Posts: 53
- Joined: Mon Jul 06, 2015 10:06 pm
- Sailboat: MacGregor 26X
- Location: Redding California
Re: 26M Swim platform
There's a rather cleverly designed swim platform shown in this video. Fast forward to 6:59 to see it. Not much info other than a few seconds of video.
-
adudinsk
- First Officer
- Posts: 495
- Joined: Tue Aug 27, 2019 12:53 pm
- Sailboat: MacGregor 26M
- Location: Belle River Ontario
Re: 26M Swim platform
Cool thrusters!
A bit "bulky" with all the tracks etc... but not a bad idea!
AD
A bit "bulky" with all the tracks etc... but not a bad idea!
AD
-
OverEasy
- Admiral
- Posts: 2873
- Joined: Mon Sep 28, 2020 11:16 am
- Sailboat: MacGregor 26X
- Location: NH & SC
Re: 26M Swim platform
Something we came across while project window shopping…. Put one on each side of the engine and they could possibly double as dock boarding steps


Here is another style on the same theme with only one upper hand rail that can be mounted on either side of the platform…


Just wondering if something like these might provide a viable option improvement over the standard fold down ladder instead of a full wrap around platform….?
Best Regards,
Over Easy





Here is another style on the same theme with only one upper hand rail that can be mounted on either side of the platform…


Just wondering if something like these might provide a viable option improvement over the standard fold down ladder instead of a full wrap around platform….?
Best Regards,
Over Easy
- Piddle and Futz
- Engineer
- Posts: 139
- Joined: Wed Sep 29, 2021 7:18 pm
- Sailboat: MacGregor 26M
- Location: Corpus Christi, Texas, 2005 26M, 50HP E-Tec
-
OverEasy
- Admiral
- Posts: 2873
- Joined: Mon Sep 28, 2020 11:16 am
- Sailboat: MacGregor 26X
- Location: NH & SC
Re: 26M Swim platform
Hi Piddle and Futz
Good point but not necessarily …. It depends on how far outboard to the side you can mount them…
Hanging my head over the stern (while we are still on the water at Lake Champlain VT) it looks like either of the models would clear the rudders on our Mac26X! Particularly if we allowed them to slightly splay out to each side when mounting by not adding any shims to square them up.
Wouldn’t know for absolutely sure without getting out of the water and make a cardboard mock-up (always a good idea for me “before drilling holes”
not that I’ve ever had a problem….. naw, not me
)
Anyway, with a tape measure hanging off the stern it sure looks feasible
Best Regards,
Over Easy



Good point but not necessarily …. It depends on how far outboard to the side you can mount them…
Hanging my head over the stern (while we are still on the water at Lake Champlain VT) it looks like either of the models would clear the rudders on our Mac26X! Particularly if we allowed them to slightly splay out to each side when mounting by not adding any shims to square them up.
Wouldn’t know for absolutely sure without getting out of the water and make a cardboard mock-up (always a good idea for me “before drilling holes”
Anyway, with a tape measure hanging off the stern it sure looks feasible
Best Regards,
Over Easy
-
neleus
- Just Enlisted
- Posts: 15
- Joined: Fri Apr 03, 2020 5:28 am
- Sailboat: MacGregor 26M
- Location: Perth, Western Australia
- Contact:
Re: 26M Swim platform
We have a similar swim platform on our 26M.
Have a look near the end of this discussion on the Australian Forum.
viewtopic.php?f=19&t=28114
Richard
Have a look near the end of this discussion on the Australian Forum.
viewtopic.php?f=19&t=28114
Richard
- Piddle and Futz
- Engineer
- Posts: 139
- Joined: Wed Sep 29, 2021 7:18 pm
- Sailboat: MacGregor 26M
- Location: Corpus Christi, Texas, 2005 26M, 50HP E-Tec
Re: 26M Swim platform
Great platform!
Anyone know where we might get one in the states? (or could at least identify the manufacturer/distributor in Australia?)
Would love to have one.
Anyone know where we might get one in the states? (or could at least identify the manufacturer/distributor in Australia?)
Would love to have one.
-
NathansWay
- Posts: 2
- Joined: Mon Nov 23, 2020 2:46 am
- Location: Perth, Australia
Re: 26M Swim platform
I'm based in Perth Western Australia and would also like one of these platforms. If anyone knows where a good place to start looking would be it would be appreciated 
-
OverEasy
- Admiral
- Posts: 2873
- Joined: Mon Sep 28, 2020 11:16 am
- Sailboat: MacGregor 26X
- Location: NH & SC
Re: 26M Swim platform
Hi Piddle and Futz!Piddle and Futz wrote: ↑Sun Oct 31, 2021 12:11 pm @OverEasy
While I like that solution, wouldn't it interfere with the rudders?
The loop arm and the under brace arm are reversible.
Placing the platform bottom above the rudders let’s them move freely.
If placed outboard of the rudders:
So the under brace goes on the outboard sides and the loop arm goes on the inboard side.
If placed inboards for the rudders:
So the loop arm goes on the outboard sides and the brace goes on the inboard side.
Best Regards
Over Easy

Example of something similar on a Mac26M


Last edited by OverEasy on Mon Jan 17, 2022 3:25 am, edited 1 time in total.
- dlandersson
- Admiral
- Posts: 4931
- Joined: Fri Aug 27, 2010 10:00 am
- Sailboat: MacGregor 26X
- Location: Michigan City
Re: 26M Swim platform
WADR, I see a tendency for a fixation on a "rear" swim platform. If you think a little more flexibly, a "side" swim platform or ladder makes much more sense. No having to avoid the propellers, etc. 
-
OverEasy
- Admiral
- Posts: 2873
- Joined: Mon Sep 28, 2020 11:16 am
- Sailboat: MacGregor 26X
- Location: NH & SC
Re: 26M Swim platform
Hi DiAndersson!
Good Point!
Yes, I like the aspect of missing the prop and rudders.
We’ve seen a couple side entry swim ladders that looked interesting.
One was a mod made back several years ago, something like “Side entry with a twist” or similar.
It had a SST bar that mounted it to the top of the starboard cockpit gunnel on and could be either folded in half and left on the side, flipped up and/or easily removed.
Not sure if they repeated the mounting hardware on both sides or not.
They had some hull flex issues if I recall correctly.
Believe that a ladder with a gunnel over hook style would possibly work better loading wise but would require storing it some place.
What we haven’t seen as yet is a side swim platform ….

That could be an interesting idea!
Best Regards
Over Easy



Good Point!
Yes, I like the aspect of missing the prop and rudders.
We’ve seen a couple side entry swim ladders that looked interesting.
One was a mod made back several years ago, something like “Side entry with a twist” or similar.
It had a SST bar that mounted it to the top of the starboard cockpit gunnel on and could be either folded in half and left on the side, flipped up and/or easily removed.
Not sure if they repeated the mounting hardware on both sides or not.
They had some hull flex issues if I recall correctly.
Believe that a ladder with a gunnel over hook style would possibly work better loading wise but would require storing it some place.
What we haven’t seen as yet is a side swim platform ….
That could be an interesting idea!
Best Regards
Over Easy
- dlandersson
- Admiral
- Posts: 4931
- Joined: Fri Aug 27, 2010 10:00 am
- Sailboat: MacGregor 26X
- Location: Michigan City
Re: 26M Swim platform
I use a SS 4 -step ladder that hooks over either side.
I also use a water pad on the water tied to the bottom of the ladder
No complaints.
Best Regards
Over Easy



[/quote]
I also use a water pad on the water tied to the bottom of the ladder
No complaints.
Best Regards
Over Easy
[/quote]
