Page 1 of 1
Will it fit?
Posted: Mon Sep 10, 2012 11:16 am
by bern
I am wondering if a 26 M and trailer will fit in my existing shop.
Does anyone have the over all dimensions from trailer tip to the farthest point........I assume it would be the motor.......
I think it will be a close call.
Re: Will it fit?
Posted: Mon Sep 10, 2012 3:18 pm
by Highlander
how long is ur shop inside
J
Re: Will it fit?
Posted: Mon Sep 10, 2012 3:35 pm
by RobertB
Do you have a ten foot high door?
Re: Will it fit?
Posted: Mon Sep 10, 2012 4:52 pm
by mastreb
You'll need 32 feet from trailer hitch to prop.
Re: Will it fit?
Posted: Tue Sep 11, 2012 10:16 am
by bern
Good news!
I have a few feet to spare, never thought about height though........my door is 9 foot.......surely it will fit under that?
Re: Will it fit?
Posted: Tue Sep 11, 2012 10:36 am
by Catigale
It wont. And dont call me Shirley....
Thread on garage clearance height
Here
Re: Will it fit?
Posted: Tue Sep 11, 2012 9:55 pm
by mastreb
According to the mast thread, it's possible to get the height down below 9' by reducing the height of the aft mast bracket (easy), which would require removing the spreaders while trailering. While I can't vouch for the solution from personal experience, if it truly works, it is easy and fast to remove and re-install the spreaders using wire hitch pins.