Poptop bow mounting to underside of top--1985 MAC 25

[Seadoc]

HELP!
Does anyone know of a source for the "fairlead-like" items that fit around the 1 inch diameter aluminum support bows and mount them to the underside of the poptop. I've spoken with Todd at BW Yachts. They don't carry them nor did he have a source.

Perhaps someone who is parting out an '85 Mac 25 or similar might have them.

If you have info on this please PM me ASAP.

Thanks

[chipveres]

Sort of. When we dropped the pop-top we broke the other end by ripping the bolt through the fiberglass. I just completed the straightforward fiberglass repair.

Faced with your problem I would resort to one piece of 3/4 plywood or two layers of 1/2. Drill through with a 1-1/8 hole saw. Then complete the shape with a jig saw. Rub a little epoxy on the edges to keep out water.

Chip
s/v Sand Dollar

[chipveres]

Also, member Bootsy1968 said he was parting out a 25. But I have not been able to contact him.

Chip