Old geezer stanchion mod

A forum for discussing boat or trailer repairs or modifications that you have made or are considering.
User avatar
Herschel
Admiral
Posts: 1421
Joined: Wed Sep 28, 2005 4:22 pm
Sailboat: MacGregor 26X
Location: Orlando, Florida
Contact:

Re: Old geezer stanchion mod

Post by Herschel »

Herschel wrote: Sun Feb 23, 2025 7:54 pm
Russ wrote: Mon Feb 17, 2025 5:50 am Nice work.

They make for a good "handle". I often use the dodger as a "handle" when going forward. I wish there was an actual handle on the dodger.
This got me thinking. I, too, have used the dodger, the Bimini, and/or the boom as "handrails/handles" going up and down from the cabin top. But I have "insisted" on thinking of this step down as a stair step and done it facing aft. What if I thought of it as a ladder step and turned and faced forward? Stepping down and backwards. I just got my boat waxed so all the surfaces are a tad slippery at best. I'm going to experiment with a forward facing decent. At a combined crew total age of 158 years, that seems prudent! :wink: Report to follow in a week or two.
Here is the promised report on using the "old geezer" stanchion used as a hand railing and descending the cabin top as if descending a ladder---backwards. I think it is a dramatic improvement in safety. I was able to keep a firm grasp on the "geezer" stanchion handle as I used the initial step to the coaming step and then all the way to the cockpit seat. I never felt like I had any iffy balancing with which to cope. I think the pics show the technique. I initially turned outboard about 90 degrees with the step to the coaming step, and then I turned all the way around. At no time did I have to give any substantial weight to the Bimini frame nor the boom. They could be used as a slight steading handhold, but they did not take any of my weight as I descended. Hope this is useful for those of us with "aging issues!" :)

Image

Image
Post Reply