Grab Handle on pillar

A forum for discussing topics relating to MacGregor Powersailor Sailboats
Locked
User avatar
BobA
Posts: 2
Joined: Wed Jun 09, 2004 4:44 am
Location: Colchester United Kingdom - Silver Impulse 26X

Grab Handle on pillar

Post by BobA »

Hi all
Looking through the american sites for the Mac 26X I have noticed a lot of you have fitted a grab handle (some with a table attached) to your boats.
I cannot find anything like this in the UK and wondered if you could point me to websites where I can possibly get such things

Bob
User avatar
Tom Root
Captain
Posts: 560
Joined: Mon Jan 05, 2004 11:39 pm
Sailboat: MacGregor 26X
Location: Annville, PA. s/v-Great White, MacX4787A202,'09 Suzuki DF-50

Re: Grab Handle on pillar

Post by Tom Root »

BobA wrote:Hi all
Looking through the american sites for the Mac 26X I have noticed a lot of you have fitted a grab handle (some with a table attached) to your boats.
I cannot find anything like this in the UK and wondered if you could point me to websites where I can possibly get such things

Bob
Try here- http://www.macgregorparts.com/havenpart ... gory,'Misc')

Click on the "deck items" catagory!
Look at the grab bar and table...is that what you want?
Last edited by Tom Root on Fri Jun 11, 2004 8:06 am, edited 1 time in total.
User avatar
dclark
First Officer
Posts: 418
Joined: Mon Jan 05, 2004 10:35 am
Location: Dave Clark - Orange County, CA - 2000 26X Day Tripper

Post by dclark »

I think most of us got them thru a Mac dealer. that is where I got mine. The nicest one I've seen with a table comes from these guys: http://www.dowsar.com/
User avatar
kmclemore
Site Admin
Posts: 6257
Joined: Sun Feb 08, 2004 9:24 am
Sailboat: MacGregor 26X
Location: Ambler, PA -- MACX2018A898 w/ Suzuki DF60AV -- 78 BW Harpoon 4.6 -- 2018 Tahoe 550TF w/ 150 Merc

Post by kmclemore »

OK.. so I'll bite.. why does the MacGregorParts one cost around $225.00 and the Dowsar $449.99... is the one really much better than the other, and if so, how?
BobCardz
Deckhand
Posts: 38
Joined: Mon Jun 07, 2004 7:17 am
Location: Pensacola, FL
Contact:

Difference

Post by BobCardz »

I think the main difference is the Dowspar one is made with delrin. The MacZparts one is made with HDPE and does not have the two side pieces. I just sold one from my Garage sale for $125 I guess I should have asked for more. But then everything is always half off :) I cant tell if the tube is different.
BobCardz
Deckhand
Posts: 38
Joined: Mon Jun 07, 2004 7:17 am
Location: Pensacola, FL
Contact:

Forgot to mention

Post by BobCardz »

Forgot to mention

Dowspar prices are Canadien... So they are probably not too far off... maybe $60 - $80 instead of $200
User avatar
jmdefino
Chief Steward
Posts: 50
Joined: Thu Jan 22, 2004 4:35 pm
Location: Oriental, N.C.
Contact:

Post by jmdefino »

I bought the one from Bob. Installed it today and am quite pleased with it. Thanks Bob. I noticed that these folks have it for $175. Not too much more than I paid.

http://www.powersailing.com/macgregorma ... ments.html
User avatar
Duane Dunn, Allegro
Admiral
Posts: 2459
Joined: Fri Jan 02, 2004 6:41 pm
Sailboat: MacGregor 26X
Location: Bellevue, Wa '96 26x, Tohatsu 90 TLDI and Plug In Hybrid Electric drive
Contact:

Post by Duane Dunn, Allegro »

We find the flip out sides on the Dowsar make it very useful. You can have it up with the sides folded in for snacks and still easily get by it on each side. Flip open the sides and you have a full width table that will hold plates for dining.

I added a custom binocular box and cup holders to mine.

The Dowsar prices are in Canadian dollars. Back when we bought the exchange rate was better. You will pay a bit more for shipping from Canada and UPS will most likely hit you with a customs processing fee. We bought ours along with our full enclosure which lumped the price into a bigger ticket and they shipped it all together.
BobCardz
Deckhand
Posts: 38
Joined: Mon Jun 07, 2004 7:17 am
Location: Pensacola, FL
Contact:

Now I feel Bad

Post by BobCardz »

Sorry about that John... Now I feel Bad

If I had known they could be bought for that little I would have sold it for Less Email me offline and I'll give you a coupon for $20 off anything else in my collection I'm trying to dispose of.
User avatar
jmdefino
Chief Steward
Posts: 50
Joined: Thu Jan 22, 2004 4:35 pm
Location: Oriental, N.C.
Contact:

Post by jmdefino »

Bob,
Please, don't feel bad.

I was quite happy with it. :) I had called BWY for one and they did not have any in stock. So I was happy to get one.

The offer you made me offline for your "garage sale" is appreciated as well.
User avatar
Pouw Geuzebroek
Engineer
Posts: 179
Joined: Mon Jan 12, 2004 11:22 am
Location: Aalsmeer (NL) The Netherlands (Europe) 1999 X 'Travelling Light' Yamaha 9.9 high thrust

Grab Handle on pillar

Post by Pouw Geuzebroek »

Yes BobA complicated business in Europe. I am trying to get the simple Crab bar without the table, for more then a year now. But no luck so far. MacGregors Parts are not responding to my online order. I found an other dealer on the West coast of the US that did not want to ship overseas. Desperately I tried to find a dealer in Florida during our X-mas holidays, overthere, but they ran out of business or could not be found. So I am very interested in your successes on this matter. :(
User avatar
Tom Spohn
Captain
Posts: 538
Joined: Fri Jan 09, 2004 9:46 am
Location: Seattle, WA '04M Suzi 70

Post by Tom Spohn »

Blue Water Yachts lists a "Pedestal Guard" in their catalog. Good people to deal with: http://www.bwyachts.com/web%20catalog%2 ... n_page.htm
Locked