BOW ROLLER/ANCHOR RODE LOCKER

Published date: July 13, 2010
  • Boat Type: Boat Type

This is my anchor and rode storage arrangement. I was originally going to attach a piece of 1-1/2" PVC pipe to the reducer at the top, to get the rode into the bilge area of the bow, but it was to difficult to feed the rope part of the rode down that far. So I settled on storing the rode in the bow space, just forward of where the interior liner stops. There is plenty of room for 25' of chain and 150' of rope.

Published by: THE CUSCUS


Model Year: 1979

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Anchor roller
    Anchor roller
    Anchoring - - December 1, 2019

    I mounted the custom anchor roller from Blue Water Yachts on "Sea Breeze." Works great and was not too difficult to install. The bow light is relocated onto a special bracket on the anchor roller. I had to extend (actually I replaced) the wire supply...

  • Delta Plow Anchor
    Delta Plow Anchor
    Anchoring - - April 2, 2010

    Used 4" PVC to create sheath to hold a 22 lb Delta plow anchor. Published by: mdeane

  • Anchor Roller and Anchor Upgrade
    Anchor Roller and Anchor Upgrade
    Anchoring - - February 23, 2010

    Anchor and roller upgrade to Lewmar anchor roller and Fortress FX16 anchor I was compelled to upgrade to larger anchors after several daytime and overnight dragging episodes. The Mac 26M is a light boat with a lot of wind surface above the waterline....