Anchor Roller / Bow Pulpit for the X

Published date: January 24, 2013
  • Boat Type: Boat Type

Installed a Bow Pulpit/Anchor Roller. Keeps the deck clear and makes deploying/retrieving/storing the anchor much easier. Originally for a Catalina 27, found it on Ebay. Added a 1 1/4" wide fender rub rail to the bow center line for reinforcement and a finished look.

Published by: macr


Model Year: 1996

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Anchor roller
    Anchor roller
    Anchoring - - December 1, 2019

    I mounted the custom anchor roller from Blue Water Yachts on "Sea Breeze." Works great and was not too difficult to install. The bow light is relocated onto a special bracket on the anchor roller. I had to extend (actually I replaced) the wire supply...

  • Using Bow Hook for Improving Anchor Line Control
    Using Bow Hook for Improving Anchor Line Control
    Anchoring - - June 18, 2012

    To avoid potential for damage to bow light, cleat and improve rode angle for anchor setting, I passed the line through a rope climbing hook attached to the bow ring. Published by: macr

  • Anchor Light
    Anchor Light
    Anchoring - - June 14, 2012

    We want to stay onboard overnight so we needed an anchor light. I have read alot of blogs regarding temporary anchor lighting; I read a mod on this sight that actually made me put off adding an anchor light for several (several) months. The mod I jus...