Anchor Locker Hatch Rope/Chain Storage Opening

Published date: July 25, 2013
  • Boat Type: Boat Type

I wanted to keep the deck clear of lines/rode when anchor was stored, so I used a jigsaw to match opening for a Shell Vent 2 x 2-1/8" to allow the anchor locker door to close on line/chain

Published by: macr


Model Year: 1996

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Anchor roller
    Anchor roller
    Anchoring - - December 1, 2019

    I mounted the custom anchor roller from Blue Water Yachts on "Sea Breeze." Works great and was not too difficult to install. The bow light is relocated onto a special bracket on the anchor roller. I had to extend (actually I replaced) the wire supply...

  • Claw Anchor Holder
    Claw Anchor Holder
    Anchoring - - May 8, 2013

    Here's a simple, cheap anchor holder I mounted to my radar arch. It's nothing more than a piece of 3" PVC pipe from Home Depot and some stainless mounting hardware. The concrete bucket is made to be extra sturdy and comfortably holds 20 feet of chain...

  • Anchor Bow Roller
    Anchor Bow Roller
    Anchoring - - April 10, 2013

    We've had successs in the Pacific Northwest with this 7.5kg (16.5lb) SS-Bruce anchor w/ Lewmar Roller #66440016. - Loading the anchor into the roller is very consistent with the SS-Swivel at the end of the anchor shank. - The Rode (30' chain and 250'...