Microwave & drawers in galley

Published date: December 1, 2019
  • Boat Type: Boat Type

A 600 Watt GE Microwave was installed in the Galley area with two plastic drawers. The photo on the left shows the finished results and the right shows it without the microwave and the front. I used the lexan panel from the original equipment for door access. To build this I installed a plywood floor in the bottom of the galley area and installed the drawers on top of it. A shelf for the microwave was installed above that. Plywood was used for the front. As you can see I needed to enlarge the front fiberglass some what. The microwave is powered by shore power or the 1000 W Heart Interface invertor/charger. You can also see the AC and DC outlets in the rear of the galley.

Published by: MS Classifieds


Model Year: 1999

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Galley Mods 26X
    Galley Mods 26X
    Galley - (MacGregor 26X) - April 17, 2020

    I removed the original galley storage and replaced with three sliding draws, a cutlery draw and a large cupboard door, The mod created much more storage space with easier access, hope you like the mod

  • Plate and Cup Storage
    Plate and Cup Storage
    Galley - (MacGregor 26X) - April 14, 2020

    Plate and cup storage unit located above galley table in a 26X

  • Galley, Wallas stove-heater
    Galley, Wallas stove-heater
    Galley - Galley (MacGregor 26X) - January 15, 2020

    Galley update, including a Wallas stove / heater 800D + 200D, a mechanical controls microwave and a deep sink. https://wallas.fi/index.php?id=1062