EV-100 Tiller Pilot below decks autopilot

Published date: April 20, 2020
  • Boat Type: Raymarine Ev-100, autopilot, MacGregor 26M, Boat Type
EV-100 Tiller Pilot below decks
EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks EV-100 Tiller Pilot below decks

Installing a Raymarine EV-100 tiller pilot below decks.

This mod is from BOAT and is quite possibly the best and cleanest autopilot for the 26M

Here is the link to the thread
https://www.macgregorsailors.com/forum/viewtopic.php?f=8&t=25657


Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Cork interior
    Cork interior
    Cockpit - (MacGregor 26X) - March 27, 2021

    Hi , for this decoration I used a 2mm thick cork roll and a slow-acting water-based glue.

  • Replace stuck steering wheel and Steering Brake
    Replace stuck steering wheel and Steering Brake
    Cockpit - 2002 (MacGregor 26X) - March 24, 2021

    Wanted to add a steering brake to my upgraded steering system. Had to use a 3 jaw puller to remove the old wheel. Tried wd40, pb blaster both overnight. 1. Used 24in breaker bar to remove the old wheel nut. Stabilize wheel. 2. Sprayed pb blaster and ...

  • Hatchway Doors
    Hatchway Doors
    Cockpit - (MacGregor 26X) - August 17, 2020

    As other owners have done, I've replaced the large white door that came with our '02 X. 3/4" plywood with 6 layers of spar urethane (the first 3 thinned 50% for absorption) and an oak piece for the overlap. Still need an inside latch or two when I fi...