vents

Published date: December 1, 2019
  • Boat Type: Boat Type
vents
vents

I have a MacGregor 19. (It's for sale by the way).
I installed three vents that have totally eliminated any venting or ordor problems. I first installed a stainless steel louvered vent in the head door. I then installed a cowl vent in the head just to the right side of the hatch. Finally I installed a solar operated vent in the hatch cover. Air flows well through out the cabin.

Published by: MS Classifieds


Model Year: 1993

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Hatch Adjuster
    Hatch Adjuster
    Ventilation - - December 1, 2019

    The front hatch did not come with a hatch adjuster so there was no easy way to keep the front hatch open except for letting it flop all the back against the deck. This put a lot of stress on the hinges plus it was pretty unattractive. I installed a h...

  • Hatch Lift
    Hatch Lift
    Ventilation - - December 1, 2019

    We installed a gas lift (the same type as used in hatchback cars) to keep the hatch partially open. The lift was available at West Marine, as were the brackets. I would recommend the 40# lift, as anything less seemed to hold the hatch open, but just ...

  • No More Skeeters
    No More Skeeters
    Ventilation - - June 12, 2018

    My Number One made a screen for the main and forward hatches that allows a nice flow through breeze without mosquito intrusion. Double layer of stretch tulle, full hook and loop perimeter - one side sewn to screen, the other sticky backed onto the ha...