Teak treads on the swim ladder

Published date: December 1, 2019
  • Boat Type: Boat Type

The standard swim ladder is not very comfortable to use. So I added teak treads when I realized that such a thing were readily available, perfectly shaped below to fit onto the stainless steel tubes. Cost: $7 plus 4 SS screws and som 3M 5200 (or similar).

Published by: MS Classifieds


Model Year: 1999

Share

Useful information

  • Perform modifications at your own risk
  • Fully research modifications before performing yourself
  • All mods are listed as is with no waranty
  • This site does not make any claims about the validity or safety of modifications posted.

Related Mods

  • Keel Protector
    Keel Protector
    Exterior - - December 1, 2019

    OK, this one might get some frowns from the hard-core sailors, but it has been good for us, and that's what matters, right? We have a 3M kevlar keel protector running from just under the eye bolt at the bow all along the keel to just before the cente...

  • Vents
    Vents
    Exterior - - December 1, 2019

    I found after having my 26x anchored in Monroe Harbor in Chicago for two seasons that mildew buildup was a problem, as was a musty smell. I have now installed four vents. The first is in the forward hatch, and it is a common plastic vent from West Ma...

  • Doors
    Doors
    Exterior - - December 1, 2019

    I purchased the boat used from a guy who had put two plexiglass doors (tinted) to replace the entranceway hatch/door on the original. These open outwards, and are made up of two identically shaped sections, one left and one right, essentially splitti...