The "Rest Of The Story"
-
roril
- Deckhand
- Posts: 49
- Joined: Sat Oct 24, 2009 8:40 pm
- Sailboat: MacGregor 26D
- Location: Lancaster, Ca.
The "Rest Of The Story"
Back in December, Mike Inmon at MacGregor, asked to use a 26D for some testing for a new boat they are building. I responded to their request and loaned them my 1988 MacGregor 26D, telling them I needed it back before HPCC 2012 in Feb. In return they said that they would fix the stress cracks and buff out the hull.
Well.....My boat now has a new Gelcoat Blue strip both top and bottom plus they were able to buff out most of the scratches on the hull.
But Wait.......Before I left, Mike took me into the shop and handed me all the parts to make my mast into a rotating mast.
And yet there is more....... I will be able to buy a new mast and sail at a near cost when I am ready. How about that Sport Fans!
Now when we have the "Show and Shine" at HPCC, "Andiamo" will be looking good!
Thanks again to Roger, Mike and the crew at MacGregors for a great experience,
Bob
Well.....My boat now has a new Gelcoat Blue strip both top and bottom plus they were able to buff out most of the scratches on the hull.
But Wait.......Before I left, Mike took me into the shop and handed me all the parts to make my mast into a rotating mast.
And yet there is more....... I will be able to buy a new mast and sail at a near cost when I am ready. How about that Sport Fans!
Now when we have the "Show and Shine" at HPCC, "Andiamo" will be looking good!
Thanks again to Roger, Mike and the crew at MacGregors for a great experience,
Bob
- Knot Tied Down
- Chief Steward
- Posts: 85
- Joined: Tue Nov 01, 2011 4:40 pm
- Sailboat: MacGregor 26X
- Location: Lake City, MI
Re: The "Rest Of The Story"
Thats exciting! I wonder what it is they are going to be building?! Also excellent about the rotating mast...they didnt happen to mention anything about the parts kit for any other models...say the
in particular? Cant wait to see some photos of your 26D all shined up!
- mastreb
- Admiral
- Posts: 3927
- Joined: Wed Feb 09, 2011 9:00 am
- Sailboat: MacGregor 26M
- Location: Cardiff by the Sea, CA ETEC-60 "Luna Sea"
- Contact:
Re: The "Rest Of The Story"
Congrats man! But the "Rest of the Story" is what exactly are they doing?
-
roril
- Deckhand
- Posts: 49
- Joined: Sat Oct 24, 2009 8:40 pm
- Sailboat: MacGregor 26D
- Location: Lancaster, Ca.
Re: The "Rest Of The Story"
I haven't been able to post pictures here. Check out my post here:
http://forums.macgregor.sailboatowners. ... p?t=137752
http://forums.macgregor.sailboatowners. ... p?t=137752
-
roril
- Deckhand
- Posts: 49
- Joined: Sat Oct 24, 2009 8:40 pm
- Sailboat: MacGregor 26D
- Location: Lancaster, Ca.
Re: The "Rest Of The Story"
I believe that they are making a faster 75 sailboat. Right now the new M is there best selling model.mastreb wrote:Congrats man! But the "Rest of the Story" is what exactly are they doing?
I was able to tour the factory with Mike. Very interesting place. The new 75 foot hull is still in the mold.
Mike will be at the LA Boat Show this week with a new M to show.
- Russ
- Admiral
- Posts: 8301
- Joined: Thu Oct 11, 2007 12:01 pm
- Sailboat: MacGregor 26M
- Location: Bozeman, Montana "Luna Azul" 2008 M 70hp Suzi
Re: The "Rest Of The Story"
As far as I know, it's the ONLY model they are selling. There are no other "models" for sale.roril wrote:Right now the new M is there best selling model.
If and when the 75 is built, it will probably not be a production model. Certainly Roger is earning his living from selling M's right now.
Glad to see your boat looking better than before. It's a great boat and you should enjoy your new shiny hull.
- Ixneigh
- Admiral
- Posts: 2462
- Joined: Thu Sep 09, 2010 11:00 am
- Sailboat: MacGregor 26M
- Location: Key largo Florida
Re: The "Rest Of The Story"
I would say it is the popularity of the smaller boats that is allowing roger to build his dream boat. Anyone who's ever bought a new Mac should get to have a ride on the 75 
I can't emagine there would be enough of a market with this economy to go into full scale production of a 75 like he has with the 26.
Ixneigh
I can't emagine there would be enough of a market with this economy to go into full scale production of a 75 like he has with the 26.
Ixneigh
- mastreb
- Admiral
- Posts: 3927
- Joined: Wed Feb 09, 2011 9:00 am
- Sailboat: MacGregor 26M
- Location: Cardiff by the Sea, CA ETEC-60 "Luna Sea"
- Contact:
Re: The "Rest Of The Story"
Very few of the 65' were built--nothing compared to the small boats. The market for boats that size is very small--few people could even afford the slip fees, much less the boat.Ixneigh wrote:I would say it is the popularity of the smaller boats that is allowing roger to build his dream boat. Anyone who's ever bought a new Mac should get to have a ride on the 75
I can't emagine there would be enough of a market with this economy to go into full scale production of a 75 like he has with the 26.
Ixneigh
- robbarnes1965
- Captain
- Posts: 563
- Joined: Thu Apr 03, 2008 7:58 am
- Sailboat: MacGregor 26M
- Location: (BYC)Montreal, Qc Macgregor 26m-2007 "Miss Coco" - after my daughter, 50hp Honda
Re: The "Rest Of The Story"
I think there is a limited market for the larger macs. Modern non-trailerable boats are beamy and the 65 certainly is not. I think the 65' has similar cubic feet of room inside to a beamy 40-something. With slip fees being by the foot, it gets expense and the people who don't care about $ are not buying a Mac of any size.
- EZ
- Engineer
- Posts: 153
- Joined: Sun Feb 01, 2004 4:54 pm
- Sailboat: MacGregor 26M
- Location: 2004 26M "Stray Monkey", with Etec 50, SF Bay, CA
Re: The "Rest Of The Story"
I've heard that Roger's daughter (who is slated to take over the company, when Roger "retires") and her husband want to develop a 22 foot model. I wonder if this is why they wanted to test a 26D? I didn't get the scoop on if it would be a powersailor or a sail only model.
-
roril
- Deckhand
- Posts: 49
- Joined: Sat Oct 24, 2009 8:40 pm
- Sailboat: MacGregor 26D
- Location: Lancaster, Ca.
Re: The "Rest Of The Story"
RussMT - I was very lucky to find my 1988 MacGregor 26D on Craigslist. The PO had taken real good care of her and had to sell her because of a new baby coming. It was a sad day for him and a great for me.
The only mods that I have made are in the RudderCraft aftermarket rudder to improve the steering and a home built PVC Furler. Now, thanks to MacGregor, I am installing the rotating mast mod which will improve the overall sailing performance, not that I really need it but it will be nice to have it heal less for the comfort of the crew. She has always been a fast/safe boat. Now I can add highly polished.
I am a self taught single-handed sailor for the most part and have learned most of my skills from listening to all you guys.
Thanks again for all your help,
Bob
The only mods that I have made are in the RudderCraft aftermarket rudder to improve the steering and a home built PVC Furler. Now, thanks to MacGregor, I am installing the rotating mast mod which will improve the overall sailing performance, not that I really need it but it will be nice to have it heal less for the comfort of the crew. She has always been a fast/safe boat. Now I can add highly polished.
I am a self taught single-handed sailor for the most part and have learned most of my skills from listening to all you guys.
Thanks again for all your help,
Bob
- seahouse
- Admiral
- Posts: 2182
- Joined: Sun Dec 07, 2008 9:17 pm
- Sailboat: MacGregor 26M
- Location: Niagara at Lake Erie, Ontario. 2011 MacM, 60 hp E-Tec
- Contact:
Re: The "Rest Of The Story"
The rotating mast reduces heel?I am installing the rotating mast mod which will improve the overall sailing performance, not that I really need it but it will be nice to have it heal less for the comfort of the crew.
- Ixneigh
- Admiral
- Posts: 2462
- Joined: Thu Sep 09, 2010 11:00 am
- Sailboat: MacGregor 26M
- Location: Key largo Florida
Re: The "Rest Of The Story"
I don't know about reduced heel but I doubt I'd have a boat this size without it, after having sailed the 26M.
If I had the 26 d I would def. retrofit.
Ixneigh
If I had the 26 d I would def. retrofit.
Ixneigh
