Besides basically being a floating fire hazard with its wiring - it looked pretty good. I took care of some of the basic wiring and got all the interior lights working. I had to fish new wire up the mast for the steaming light to finally get that light working. I've replaced all the sheets, cleared a massively blocked cockpit drain plug.. I made one of the 11" Clamp rig tensioning tools to try and get the rig to a half-way okay state.. Thanks to a post on these forums. The Lewmar #6 winches were taken apart and well lubed. I don't think they have ever been taken apart. They were filthy and dry inside.
Thankfully my wife and I did get to sail it a couple times before I decided to start tearing it apart.
I even convinced her to help clean a little!

I've spent the better part of today dropping the mast and repairing the daggerboard. It came with a little rub and marks on the bottom.
Its a project on the go. I still have a list of things to do including mounting some Spinlock XTS clutches for the halyards.










