Boat Lift

[FLGSHP7]

I finally got my boat into the lift for bottom paint yesterday. I decided to use SeaHawk Systems Shark Skin Epoxy with copper additive. I'll also be replacing m y broken keel cable at this time.

When I was under the boat yesterday I noticed water dripping from one of the plugs for the swing keel access. Do these need to be rebedded? Is it okay for them to drip water? I assume it just goes into the ballast tank?

Here are some pics:







If anyone has used SeaHawk Systems bottom paints let me know what you think.

[Sumner]

I wouldn'g worry about a little water coming out of there ....


http://purplesagetradingpost.com/sumner ... de-40.html

... I put some sealer on the plugs going back in.



I used Sea Hawk products for the bottom. Barrier paint and antifouling paint ....

http://purplesagetradingpost.com/sumner ... de-39.html

Used the same on the Endeavour and so far real happy with them,

Sumner

============================
1300 miles to the Bahamas and back -- 2015

The MacGregor 26-S

The Endeavour 37

Trips to Utah, Wyoming, Idaho, Canada, Florida

Mac-Venture Links

[Jonair222]

DANG THAT GREY IS SHARP